Sound Homogeneous
sound_homogeneous
Sound Homogeneous is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Used with
Flexural Strength is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Efflorescence is visible crystalline salt deposit on masonry or stone surfaces from moisture transport. A defect/appearance issue managed by detailing and cleaning.
Dense Material is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Vein is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Abrasion resistance is how well a stone surface withstands wear—important for floors and paving. Reported from standard tests on datasheets.
Bowing is concave or convex deformation of a stone panel after installation—often from moisture or thermal effects. A defect/performance risk on façades.
Water absorption is the percentage of water a stone takes up after immersion—key for exterior and wet-area suitability. Reported on technical datasheets with test method.
Breaking load is the maximum applied load causing specimen failure in strength tests. Technical datasheet property for structural design.
Frost resistance is the ability of stone to withstand freeze–thaw cycles—critical for exterior paving and cladding in cold climates. Datasheet property.
Breakage means breaks or cracks in stone material during handling, transport, or use. Quality/claims language on packing and insurance.
Homogeneous Stone is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Open Porosity is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Porosity is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Rift is a preferred cleavage or splitting plane in stone, used when producing natural cleft faces. Technical cutting language.
Surface scaling or layer detachment caused by stone deterioration. Quality or defect language used in inspection and claims.
Spalling is surface flaking, chipping, or fragment detachment on stone—often from freeze–thaw or impact. Defect/appearance risk language.
See also
Also called in other languages
ES / TR / … trade aliases only — this article stays English. Use the EN · ES · TR control in the header to browse name hubs.
+- essanas y homogeneas
Also called in other languages
ES / TR / … trade aliases only — this article stays English. Use the EN · ES · TR control in the header to browse name hubs.
This page is English. The chips below are trade names the market actually uses (ES, TR, …) — aliases, not a language switch and not a Spanish or Turkish site.
esSpanish market namesBrowse all ES names →
| Term | Markets | Seen |
|---|---|---|
| sanas y homogeneas | ES×1 | ×1 |
FAQ about non-English market forms (1)
esWhat does "sanas y homogeneas" mean in Spain?
"sanas y homogeneas" is a Spanish market form used in Spain for Sound Homogeneous. Sound Homogeneous is a defect or QC term used when checking stone surfaces, edges, or material soundness before acceptance.
Sourcing Sound Homogeneous?
See live slabs from verified factories — real inventory, real photos.