Bevel Size Two Or Three Centimeters

Raw Finish

Raw finish is the rough, unfinished stone surface left after sawing or extraction, before grind or polish. Factories and buyers use it for blocks, slabs, or pieces still in process.

Honed Finish

Honed finish is a matte stone surface produced by abrasive grinding short of full polish. Buyers order it for smooth, low-sheen floors, walls, and cladding on marble, limestone, and travertine.

Filled Finish

Filled finish means natural pores and cavities are closed with cement, resin, or other filler before the final face finish. Common on travertine when a closed face is required.

Polished Finish

Polished finish is a high-gloss stone surface made by progressive polishing. It maximizes color depth and reflection on hard stones; edges and fill quality show clearly under light.

Sandblasted Finish

Sandblasted finish is a matte, even roughness produced by abrasive blasting. Improves grip outdoors and gives a consistent outdoor look on granite, limestone, and basalt.

Honed

Honed is a smooth matte stone finish from abrasive grinding—low sheen, soft hand-feel. Ordered with the material and cut; not a stone name by itself.

Polished

Polished is a high-gloss stone finish from progressive abrasive grit and buffing. Shows color and figure clearly; shows wear and etching more readily than honed.

Brushed Finish

Brushed finish is a stone surface textured with abrasive brushes, creating light relief and a soft sheen. Ordered on many limestones and travertines for a natural, low-gloss look.

Open Pore Travertine

Open-pore travertine keeps its natural voids unfilled on the visible face. Buyers choose it for a more natural, textured look versus filled pore. Spanish trade names it poro abierto.

Tumbled Finish

Tumbled finish softens edges and face via drum abrasion—antique look, low sheen. Common on travertine and limestone pavers.

Tumbled

Unfilled Honed

Unfilled honed is a matte honed face with natural pores left open—common on travertine when open pore is required. Combines finish and pore-fill choices in one phrase.

Sawn Finish

Sawn finish is the as-cut stone face retaining saw marks and no polish. Used industrially or as a starting face before honing, flaming, or other finishing steps.

Aged Finish

Aged finish is a weathered, softened stone surface that mimics natural wear—often via tumbling or similar aging. Edges feel muted rather than sharp.

Filled Honed

Filled honed travertine has pores filled then honed matte. Smoother underfoot than open-pore; still confirm fill quality on the lot.

Unfilled

Unfilled means natural pores and voids are left open on the visible face—common on travertine when buyers want an open, natural look. Needs sealing for most floors.

Bush Hammered Finish

Bush-hammered finish is a coarse, regularly pitted stone surface for grip and a tooled architectural look. Common on exterior granite and hard limestone.

Bush Hammeredbushhammered