Laminated Edge

Stone Slab

A stone slab is a large-format sawn natural-stone sheet used for countertops, cladding, and vanity tops. Thickness (2 cm / 3 cm) and finish are ordered with the slab.

plakatablatablas

Vein Cut

Vein cut is a block cutting orientation parallel to the stone’s veins or bedding planes. The face shows linear banding along the cut. Spanish trade says a la veta or con veta; English short forms include VC and veincut.

a la vetaVCcon veta

Cut To Size Stone

Cut-to-size stone is fabricated to specified dimensions (treads, sills, panels) rather than only stock tile or slab formats. Turkish factories often say ebatlı; Spanish says cortado a medida. Dimensions and finish are stated on the order.

ebatlıcortado a medidaebatli

Stair Tread

A stair tread is the horizontal stone step surface (and often the nosing) fabricated for stairs. Turkish: basamak; Spanish: peldaño or huella. Thickness, finish, and edge profile are order fields.

basamakpeldañoshuella

Cross Cut

Cross cut is a block cutting orientation across the stone’s bedding or structural direction, not parallel to the veins. It usually shows a more clouded or flecked face than vein cut. Spanish orders often say sin veta or al agua.

sin vetaal aguacroscut

Stair Riser

Vertical face between successive stair treads. In trade it also appears as rıht (Turkish), tabica (Spanish), Tábicas (Spanish). Attested most in Turkey and Spain.

rıhttabicaTábicas

Raw Stone Blocks

Raw stone blocks are unprocessed quarry blocks intended for later sawing into slabs or cut-to-size. Sold by weight or block size, not by finished face area.

blocksblocchirough blocks

Paver

A paver is an individual outdoor paving stone or slab unit for terraces, paths, and plazas. Thickness, finish, and joint layout are specified for traffic and weather.

paverspaveradoquines

Vein Cut Travertine

Travertine cut parallel to its veins or bedding. In trade it also appears as VC traverten (Turkish), travertino con veta (Spanish), Vein-cut travertine (English). Attested most in Turkey, Spain, and Venezuela.

VC travertenVein-cut travertinetravertino con veta

French Pattern

French pattern (Versailles pattern) is a modular mixed-size paving layout using several tile dimensions in a repeating set. Sold as pattern sets, not a material type.

French PatternPatron francesfrench patterns

Kerf

A kerf is a narrow saw-cut groove in stone that receives an anchor or fixing device—common in cladding systems. Fabrication detail, not a face finish.

kerfkerf slotsawcut kerf

Window Sill

Horizontal element forming the bottom of a window opening. In trade it also appears as denizlik (Turkish), Vierteaguas (Spanish). Attested most in Turkey and Spain.

denizlikVierteaguas

Cross Cut Travertine

Cross-cut travertine is travertine sawn across the bedding so the face shows a cloudy, flecked pattern rather than long veins. Spanish trade often says sin veta; factories pair it with filled or open pore and a finish.

cross-cut travertinetravertino cross cuttravertino al agua

Marble Tiles

Marble tiles are modular pieces cut from marble for floors and walls. Orders specify selection, finish, thickness, and size. Spanish: baldosas de mármol. In trade it also appears as baldosas de mármol (Spanish), mármol en baldosas (Spanish). Attested most in Turkey and Spain.

Marble Tilesbaldosas de mármolmármol en baldosas

Ashlar

Ashlar is precisely dressed prismatic natural-stone masonry blocks with square edges. Construction/unit term, not a polished slab finish. In trade it also appears as ashlars (English), natural stone ashlars (English). Attested most in the US, DE, and Italy.

ashlarsashlarnatural stone ashlars

Coping

Coping is stone capping along wall tops, pool edges, or parapets. Profiles (bullnose, etc.) and finish are specified for weather and traffic exposure.

copingsAlbardillascopping